HTC 手机 刷机


ROM Upgrade Utility (RUU)
Before Running the ROM Upgrade Utility
Before you run the ROM Upgrade Utility (RUU), make sure you check and do the following first: 1. USB sync cable is connected to the computer. 2. The standby and hibernation modes are disabled on the computer. 3. All running applications on the computer have been closed. 4. USB sync cable is connected to the Mobile Device to establish an ActiveSync connection with the computer. 5. Do not interact with your Mobile Device unless instructed to do so.

General Procedure on Installing the ROM Update
1. 2. Back up your personal data from the Mobile Device to your computer using ActiveSync if you want to ensure you don’t lose any of your data. On your computer, run the ROM Update Utility (RUU) to install the ROM update to your Mobile Device. (The next section provides a detailed procedure on how to install the ROM Update). Restore your personal data back to your Mobile Device using ActiveSync. (Optional)

3.

How to Install the ROM Update It is very important that the help desk personnel understands very well the installation instructions. Actual hands-on practice with the installation process is recommended for the personnel to better understand any installation problems users may have.
Note: Before running the RUU, back up any personal data from the Mobile Device to the computer first using ActiveSync. 1. On the Welcome Screen, click Next to begin the ROM update installation.

2. On the next screen, follow the listed instructions in the dialog box first. When you are done, click Next to proceed.

Note: You should read and follow all the instructions listed before clicking Next. 3. The following message will then be displayed, indicating that the utility is verifying and acquiring information about the device as preparation for the update process.

Wait for this verification process to finish.

4. Current information about the device, such as the model ID, image version and language will then be displayed. Click Update to proceed.

5. Below the device information, information about the new ROM update will then be displayed. If you are certain that you want to install the Mobile Device with the new ROM update, click Next to proceed.

6. A confirmation message then appears and shows the length of time it will take to copy the necessary files (including radio image) to the device. Click Next to begin the update.

A progress bar will run through the screen during the update process.

Note: In the middle of the update process, the progress bar may stop running. This is normal as the RUU is adjusting itself to complete the update process automatically. 7. When you see the screen below, it means update is complete. Click Finish to exit the utility.

Troubleshooting and Error Recovery
Almost all RUU related errors can be recovered. When an error occurs, the utility will display an error message and provide recovery measures to allow you to continue with the update process. After errors are recovered, do the following to continue with the update process:

1. 2. 3. 4. 5.

Disconnect the Mobile Device from the USB cradle/cable. Reset the Mobile Device. Reconnect the Mobile Device to the USB cradle/cable. Check that the communication cradle/cable is connected properly. Return to the ROM Update Utility to continue with the update.

If errors cannot be recovered, please refer to Q&A section for more details.   ERROR [202, 204] : CONNECTION

This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.   ERROR [260] : CONNECTION

This error occurs when there is an “open port error” before upgrading the CE ROM image. Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.     ERROR [206] : MEMORY ALLOCATION ERROR [280] : UPDATE ERROR

When you see any of these error messages, close other running programs on the computer and run RUU again.     ERROR [208] : FILE OPEN ERROR [210] : FILE READ

These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.       ERROR [212] : FILE CREATE ERROR [214] : FILE WRITE ERROR [222, 224] : DEVICE NOT RESPONDING

These error messages will appear when remote access control has failed. Check the ActiveSync connection and try running RUU again.   ERROR [220] : MAIN BATTERY POWER

This error message will appear when the device’s battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure that

your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery when it is upgrading the radio).   ERROR [238] : FILE READ

This error message may appear when, for some unknown reason, the ROM image on the Mobile Device is corrupt. Download the whole RUU and try again.   ERROR [240] : FILE OPEN

When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.         ERROR [242] : INVALID LANGUAGE ERROR [244] : INVALID MODEL ID ERROR [294] : INVALID VENDER ID ERROR [296] : UPGRADE ONLY

One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.   ERROR [246] : DEVICE NOT RESPONDING

This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance.   ERROR [262, 276, 284, 302] : UPDATE ERROR

This error occurs during the CE ROM code upgrade process. Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue. Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.   ERROR [300] : INVALID UPDATE TOOL

This error message will appear when you use the incorrect RUU version to upgrade.   ERROR [330] : ROM IMAGE ERROR

This error message will appear when you use the incorrect RUU to upgrade and the image file size is larger than the Flash ROM size. In this case, download the correct RUU

version to upgrade.

Q & A for RUU Upgrade
1. Q: Before calling the service center for help… A: Inform the service center about the error message (error no.) shown on the setup screen on the computer.

2.

Q: How long will it take for the verification process to finish? A: It will take about 1 minute, but it also depends on the speed of your computer.

3.

Q: What should I do if I see the progress bar turn red on the Mobile Device? A: Do not do anything. This is normal as the RUU is adjusting itself to complete the process. You should not interrupt it by pulling the device out of the cradle unless being prompted. Q: During the upgrade, the progress bar is moving. If the error message (ERROR [262] : UPDATE ERROR) appears, what should I do? A: This may occur when the connection is lost, without power supply, computer host is down, or due to other unexpected cases. You will see that there’s still one progress bar displayed on the device but it is not moving any more. The device cannot get into the Wince screen, so you cannot connect with ActiveSync. This problem usually can be recovered. You just need to follow the instructions in the error message box, reset the device, and run RUU again. RUU will re-flash the whole image again. Note: You should remove the battery and reset the Mobile Device.

4.

5.

Q: If I encounter ERROR [260] : CONNECTION, what should I do? A: You can reset the device and run RUU again. If you still encounter the same ERROR again, reset the computer PC and try again. Q: If I encounter ERROR [300] : INVALID UPDATE TOOL, what should I do? A: This error message will appear when you use the incorrect RUU to upgrade. Please make sure you use the correct RUU version to upgrade. Q: If I encounter ERROR [220] : MAIN BATTERY POWER, what should I do? A: , This error message appears when your device’s battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure your device has enough power to upgrade the radio. Q: I use RUU to update and failed, and my device always boots in three-color mode and cannot enter CE OS anymore, what should I do now? A: If the update process has failed, you will see that your device will always boot in three-color mode. It’s normal and can be recovered. Please follow the instructions below to reset your device and to establish a connection with the computer. 1. Disconnect your Mobile Device from the USB cradle/cable. 2. Reset your Mobile Device. 3. Reconnect your Mobile Device to the USB cradle/cable. 4. Check that the communication cradle/cable is connected properly. 5. Return to the ROM Update Utility. Note: You should ignore the ActiveSync connection.

6.

7.

8.


相关文档

手机HTC刷机汇总
htc手机怎么刷机
HTC手机刷机教程指南 刷机就这么简单
HTC手机刷机教程
HTC手机刷机详细文档
htc手机刷机步骤
HTC手机刷机详细步骤图解
HTC手机通用刷机教程
刷机不求人 HTC手机刷机教程指南
HTC Android 手机刷机详细全教程
电脑版